VoyagerESR

Routing, Switching and VOIP,

Based on CISCO 5915 Embedded Service Router (ESR)

Ruggedization is a key feature with a lightweight, milled aluminum enclosure and dustcaps for all ports.

VoyagerESR-2-product

The VoyagerESR is the core routing and switching module in the Voyager networking system. It has more capability in a smaller form factor than any other networking module on the market. It contains a Cisco 5915 ESR with a Klas-designed switch for increased capability and function. The VoyagerESR has a milled aluminum enclosure, is fully rugged with no internal cabling, moving parts, or fans, and can even be placed in an IP67, MIL-STD 1275D-compliant enclosure. VoyagerESR has been environmentally tested according to MIL-STD-810G and passed its multiple methods.

VoyagerESR’s feature set includes:

  • Fanless design with dustcaps for increased ingress protection and improved reliability
  • 12x Fast Ethernet switch (4 with PoE)
  • 2x Fast Ethernet routed ports
  • 2x FXS ports
  • Optional Voyager Ignition Key (VIK) removable storage to support eToken-like reconfiguration
  • Cellular/Wi-Fi/Harris radio tethering
  • Optional cellular core network
  • Integrated UPS/2+ hour battery backup, DC out for a range of HAIPE devices (with Voyager 1 battery)
  • The battery-backed NTP server accessible to Cisco 5915 ESR

SWaP

VoyagerESR has 38% the volume, 57% the weight and approximately 25% the power of its nearest SWaP competitor (when comparing just the routing, switching and power features). See our video on how the competition stacks up.

Specifications:

VoyagerESR primary components

  • Cisco 5915 ESR
  • Klas VoyagerSW14 switch
  • Internal Ethernet connection between switch and router

Cisco 5915 ESR feature set

  • Cisco IOS 15.2(3)GC1
  • Routing, switching, VPN
  • IP Mux voice bandwidth conservation
  • Cisco Call Manager Express
  • WAAS Express WAN acceleration
  • Radio Aware Routing Protocol

Klas VoyagerSW14 feature set

  • Layer 2 STIG compliant switch
  • 802.1Q VLAN, CDP
  • DHCP, 802.1x, port security
  • SCP, SSH, SNMP v3, TACACS+, RADIUS
  • Multicast IGMP, IGMP snooping
  • STP, MSTP

Physical

  • 7.4” W x 6.3” L x 2” H (188 x 160 x 52mm)
  • 3.25 Ib / 1.5 kg

Electrical

  • 10-18 VDC Input for operation
  • 48 VDC input for PoE must be provided by the Voyager chassis used, where:

■ Voyager 1: provides 10 W of PoE power (48 VDC), sufficient to power one Class 2 PoE phone at 6.25 W each

■ Voyager 2: provides 15 W of PoE power (48 VDC), sufficient to power two Class 2 PoE phones at 6.25 W each

■ Voyager 8: provides 100 W of PoE power (48 VDC), sufficient to power sixteen Class 2 PoE phones at 6.25 W each

  • Maximum 15W power consumption without PoE; each PoE port requires additional 8-15W depending on powered device
  • MIL-STD 461F / FCC Part 15B validated

Ports

  • Combined 12-port 10/100 BaseT switch
  • 4x IEEE 802.3af PoE ports
  • 2x 10/100 Base T routed ports
  • 2x FXS voice interfaces
  • 1x Voyager Ignition Key (VIK) storage interface
  • 1x ISDN S/T interface for Inmarsat Swift/GAN (EOL)
  • 1x USB Type-A interface supporting sync serial, cellular tethering or Harris radio tethering
  • 2x RJ-45 serial console ports

Construction

  • MIL-STD-810G
  • Aluminum chassis with integrated cooling for fanless operation

Operating Temperature

  • -25 to 60 °C with conduction cooling
  • -25 to 70 °C with forced air cooling in chassis

Storage Temperature

  • -30 to 85 °C

Voyager News

Former CIA Associate Director of Military Affairs and SOCOM Deputy Commander, Retired LTG John F. Mulholland, Jr., Joins Klas Telecom Government as Board of Directors Advisor

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments

August 9, 2018 (HERNDON, VIRGINIA) – Klas Telecom Government, a company that specializes in providing the U.S. Department of Defense and federal agencies with lightweight and man-portable tactical communications systems, announced today that retired Lieutenant General (LTG) John F. Mulholland…

Klas Telecom Releases VoyagerSW26G Rugged GbE Switch Based on New Cisco ESS 3300

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments

June 4, 2018 (WASHINGTON, D.C.) – Klas Telecom announced today the release of a new hardware module added to the Voyager deployable communications product suite, the VoyagerSW26G. VoyagerSW26G is a…

Klas Telecom Launches Voyager Tactical Data Center 2.0 at SOFIC 2018

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments

May 21, 2018 (WASHINGTON, D.C.) – Klas Telecom announced today a new release of the Voyager Tactical Data Center (TDC), the Voyager TDC 2.0. The company will debut the system this week at SOFIC 2018 in Tampa, FL…

Klas Telecom Announces VMware vSAN Support for Voyager Tactical Data Center (Voyager TDC)

| News, TDC, Voyager, Voyager TDC | No Comments

May 11, 2018 (WASHINGTON, D.C.) – Klas Telecom announced today that, after rigorous testing, VMware now supports vSAN™ hyper-converged infrastructure on the Klas Telecom Voyager Tactical Data Center (TDC).