Cisco 5915 ESR (with PoE) + embedded CradlePoint and mesh radio options


Originally designed for markets where ruggedization and low SWaP are critical, the Voyager Embedded Router m-Series (VoyagerERm) offers the same Cisco 5915 ESR capability as the VoyagerESR in half the size and without compromising on feature set and capability.

The VoyagerERm consists of a Cisco 5915 ESR plus one of a number of optional modules as described in the VoyagerERm Options section below.  It contains a console management port in addition to four fast Ethernet ports (one of which is PoE enabled).

Ruggedization is a key feature of the VoyagerERm with a lightweight, fanless design and an extruded aluminum enclosure with dust caps for all ports.

VoyagerERm Options

VoyagerERm-CP1: Cisco 5915 ESR with full Cisco IOS support including routing, VPN, Call Manager Express, DLEP radio integration & WAAS Express WAN Acceleration + embedded Cradlepoint IBR600NM wireless module with Wi-FI LAN/WAN, 3G/LTE cellular client

VoyagerERm-CP2: Cisco 5915 ESR (same as above) + Cradlepoint IBR600P with two external modem antennas and two 2.4 GHz 802.11n Wi-Fi antennas with integrated 3G/4G modem

VoyagerERm-NW: Cisco 5915 ESR (same as above) with no wireless module and a blanking plateprovided

VoyagerERm-WR: Cisco 5915 ESR (same as above) + Persistent Systems Wave Relay mesh radio



  • 1 x RJ-45 console port
  • 4 x 10/100 BaseT Fast Ethernet ports (1 with PoE)
  • 1 x USB Type A port


  • 7.4” W x 5.7” L x 1” H (188 mm x 145.2 mm x 26 mm)
  • 1.8 lb / 0.8 kg


  • 10-18 VDC Input for operation
  • 48 VDC input for PoE
  • Maximum 15W power consumption without PoE. Each PoE port requires additional 8-15W depending on powered device


  • Integrated aluminum chassis with cooling fins for fanless operation
  • Sealed unit with dust caps for extra protection

Operating Temperature

  • -25oC to 60oC with conduction cooling
  • -25oC to 70oC with forced air cooling

Storage Temperature Range

  • -30oC to 85oC


  • Cisco IOS
  • SNMP v1, v2, v3


  • 802.11n



Voyager News

Klas Telecom Voyager Tactical Data Center Receives MIL-STD-810G Certification for Key Environmental Test Methods

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments
October 2, 2018 (WASHINGTON, D.C.) – Last month, Klas Telecom’s Voyager Tactical Data Center (TDC) received validation for multiple MIL-STD-810G Department of Defense (DoD) Test Method Standards for Environmental Engineering after undergoing rigorous stress testing by...

Former CIA Associate Director of Military Affairs and SOCOM Deputy Commander, Retired LTG John F. Mulholland, Jr., Joins Klas Telecom Government as Board of Directors Advisor

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments
August 9, 2018 (HERNDON, VIRGINIA) – Klas Telecom Government, a company that specializes in providing the U.S. Department of Defense and federal agencies with lightweight and man-portable tactical communications systems, announced today that retired Lieutenant General (LTG) John F. Mulholland...

Klas Telecom Releases VoyagerSW26G Rugged GbE Switch Based on New Cisco ESS 3300

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments
June 4, 2018 (WASHINGTON, D.C.) – Klas Telecom announced today the release of a new hardware module added to the Voyager deployable communications product suite, the VoyagerSW26G. VoyagerSW26G is a...

Klas Telecom Launches Voyager Tactical Data Center 2.0 at SOFIC 2018

| News, Solutions - Tactical, TDC, Voyager, Voyager TDC | No Comments
May 21, 2018 (WASHINGTON, D.C.) – Klas Telecom announced today a new release of the Voyager Tactical Data Center (TDC), the Voyager TDC 2.0. The company will debut the system this week at SOFIC 2018 in Tampa, FL...